The water flow-through the induction coil to cool it. The coil is Simply a bare copper tube amps with 30.000 running-through it, yet water cooling When The flows out of the coil Into the cooling tower Whatsoever it Holds no charge. The maintenance supervisor at my job Asked Me If I Knew I Was and why today stumped. Any help?
Landlord Keeps Saying copper is a bad choice. “Repair” person cut line to stove and Refused to return to fix. I do not have Any burners to cook on! Currently the pipe is a mass of connectors are screwed to patch: various cuts, joins. Very Old House, I’m responsible for maintenance. Thank you for your time to think of and answer to this.
7 year old Female and a 3 year old Male. Exceptionally well trained training and low maintenance (except shedding ounces a week. Ringo and Copper Have Been my refuge since my wife left. I am a Soldier and I Have to go away to Frequently trining. I am a wreck from this. I would get out and get a full time job to keep ‘em if i could.
I’m not sure what my necklace is made of, Which Probably HAS to do with this lot. It Was Originally gold-plated, order now it’s worn to silver. I dropped it one day in my sink, and ever since then, my skin smelled like copper HAS Afterwards. . . After your hands smell like you’ve been holding currency and it’s really gross. Is There anyway to clean my necklace so this Does not happen anymore? :
Here’s One That Could not fix a plumber. . . at least never cam back ET. The hot water, not the cold, in our 2nd floor shower, both, head and faucet, Comes out very slow, like showering Under a sprinkling can. No leaks, copper tubing, shower head water saver filter clean and out, new boiler, and pressure WAS laundry charges. The sink, Which feeds from The Same tubing, thin flows. La m
Here’s One That Could not fix a plumber. . . at least never cam back ET. The hot water, not the cold, in our 2nd floor shower, both, head and faucet, Comes out very slow, like showering Under a sprinkling can. No leaks, copper tubing, shower head water saver filter clean and out, new boiler, and pressure WAS laundry charges. The sink, Which feeds from The Same tubing, thin flows. La m
My Mom ent her home. The cold water feed Into the water heater sprung a leak in the copper pipe (the ~ 2 foot length connected to the unit). The useless moron of a maintenance guy put a bolt-down clamp with rubber on it, aim it Did not fix it. So now INSTEAD of spraying Against the wall, it’s running down onto the water heater. Supposing I wanted to fix this, what’s the best way? New pipe soldered Into place? Some of fate patch?
I Have posted this issue Before, goal added Some additional details: Hi thar, I’m a bit Concerned about my Phenom 955BE idling at 44C. Under a normal load (eg playing NFS Shift) it sits on around 58-61C. Under a CPU stress test it gets to about 69C max. Is this a bit too warm for this CPU? It’s on the stock cooler (the copper pipe one at least) The room is airconditioned (so about 22-23C) and the box HAS 5x 80mm fans (So the box temp is around 26C), and II have since Pulled out the heat-sink, Cleaned it perfectly, Applied some good thermal compound (Arctic Silver 5), it booted back up, STILL sitting on 44C idle and 55C Under normal load and 68C under stress test (prime 95 torture test) Do I need to buy aftermarket cooler year ( I really Did not want to!>. <)? Why is not the one with the AMD chip send out good enough? gold thesis speeds are really OK? Also the clock speeds are set to default (3. 2ghz) That I found in the BIOS SYSTEM WAS Able to auto adjust the voltage, so I disabled it, the CPU VCore set to 1. 35V (down from 1. 45V) Now it idles on 42C and 61C Stress tested – much better, aussi Did the CPU tests in 3DMark06 and Have not Lost Any performance. I’m trying to find what the recommended vCore voltage for this chip is. . . .
